By RQS Editorial Team Reviewed by: Miguel Ángel Garcia

With LED technology rapidly advancing in recent years, more cannabis growers are now switching to LED for their indoor operations. Merely a novelty just a few years back, LED grow lights are now performing as well, if not better, than HID lamps, and have also become more affordable. Due to the many advantages of LEDs, from consuming less energy to being more robust and having a longer life span, they are now a great choice for indoor cultivators of different skill levels. If you grow cannabis with LEDs or plan to make the switch, here are some tips for you.


What to Look for When Choosing a LED Grow Light

Before you go buying a LED grow light, it helps to know what’s available. Currently, there are three main types of LEDs that you can use to grow cannabis, each of which has its pros and cons. The type of LED light you should choose will depend on what exactly you’re looking for, and how much money you’re willing to spend.

3 Main Types of LED Grow Lights  

 

  • Standard (“Purple”) LED

    STANDARD (“PURPLE”) LED

    These standard LED light fixtures were the first type available for growing, and today, they’re still widely available. These lights contain a lot, sometimes hundreds, of small to medium wattage LEDs (3–5 watts per single LED) in a compact fixture. Cannabis growers sometimes refer to these as “purple” lights, as they often comprise a mix of red and blue LEDs that combine to emit a purple hue. The biggest advantage of these standard LED lights is their price point. Most are manufactured overseas, and you can find them aplenty on eBay and other places online. A disadvantage is that their quality is often lacking; they can be less than reliable, and their light output is often lower than other types of LEDs, leading to lower yields. To remedy this, we’re now seeing standard LEDs begin to include COB LED lights or UV LEDs in addition to the red and blue, which can help with yield and bud quality.

    • Cob LED

      COB LED

      COB means “chip on board”. A COB LED is made of many hundreds of tiny LEDs on one single small chip, as opposed to differently coloured LEDs spread over the entire fixture (as is the case above). COBs are among the most efficient LEDs. They produce a very intense white light that is similar to the natural light spectrum of the sun. One advantage of COBs is that they have good penetration into the plant canopy due to their intensity, resulting in a final yield approaching that of quality HID lamps. They also have a light spectrum that is optimal for healthy growth, and are very energy-efficient. The drawback can be that a quality grow light with COB LEDs is quite expensive compared to cheaper purple lights. Some grow light manufacturers combine several COB LEDs into one fixture, often equipping them with lenses and reflectors. There are also lights available that are comprised of only one single COB. These single-COB fixtures can be a good choice for larger growing spaces, as you can space a number of them evenly for light distribution across the entire area. Most growers use COB LEDs with a light spectrum that works both for vegging and flowering, but you can also find those with a spectrum (“colour temperature”) tuned specifically to vegging or flowering.

      • Spread-style LED

        SPREAD-STYLE LED

        Spread-style LEDs are comprised of a large number of small LEDs that are spread out on a larger panel or board. There are also spider-style LEDs and rack-style LED lights, which are widely used in commercial greenhouses. The spider-style LED lights don’t use flat panels, but spider-like “arms” with LEDs instead. The main advantage of spread-style grow lights is that they are among the most energy-efficient LEDs, which means you can get the most light for the wattage you’re using. A disadvantage is that quality spread-style LEDs, such as the spider-style lights, can be extremely expensive.


        The Advantages of Growing With LED Lights

        We’ve already mentioned that LED lights have several advantages when compared to other types of grow lights, such as HID. Here is a full rundown of why you may want to choose LEDs for your next growing operation.

        1. LED Lights Are More Energy-Efficient

        Compared to HID lights, LEDs are a lot more energy-efficient. They use less electricity, and will cost much less to operate in the long-run. Although high-end LED lights can sometimes cost a good chunk of money outright, the investment is almost always worth it as your savings over time will make up for the higher initial cost. Likewise, quality LED light fixtures will also have a longer life span compared to HID, the latter of which tends to lose performance over time and needs frequent replacement. A good LED light can last you many years with no maintenance needed.

        2. They Run Cool

        LEDs produce a lot less heat compared to HID lights, which can be a big advantage as you won’t require extra cooling systems in your grow room or tent to keep temperatures optimal. This is especially advantageous if you grow in summer or happen to live in a warmer climate. The downside to this is that if you live somewhere cold, you may now need to consider a heater in the colder months. But as LEDs save you money over time, this can make up for the potential costs of running a heater.

        3. With LED, You Can Move Your Plants Closer to the Light

        LEDs produce less heat, which means less stress on your plants—so you can move your lights closer to your plants without any negative effects. Higher light intensity translates to higher yields!

        4. LED Lights Reduce Your Watering Schedule

        With less heat produced by lights, the soil in your pots will stay moist for longer, thus reducing the amount of times you need to water. If you’ve just switched from HID to LED and are used to your plants drinking quite a lot, you now need to be careful with your new watering schedule under LED, otherwise you might overwater your ladies.

        5. You Need Less Nutrients

        When you water cannabis plants, you’ll normally do so with an infusion of nutrients. In addition to watering less, your plants will also need less nutes than they would before. In addition to some nice savings on nutrients, the less-frequent watering and feeding schedule will also decrease nutrient buildup, so there’s a lower risk of nutrient lockoutand plant deficiencies. If your system is purely hydroponic, there is no serious risk of nutrient buildup.

        Growing With LED: What to Consider for Each Stage of Cultivation

        As we touched on earlier, many types of LEDs have a fixed light spectrum that works for both the vegetative (growing) and flowering phases of cannabis. This way, you can just use the same light throughout your entire grow from seed until harvest.

        Although this is convenient for most, there are those who want to fine-tune their lights for best results and optimal efficiency in each growing phase. For this purpose, some commercial LED lights have a switch to activate a veg light spectrum or a flower light spectrum. Here are some more factors to consider throughout each stage of growth.

        1. LED Lights And Seedlings

        Seedling

        As soon as your seeds have sprouted, your soon-to-be cannabis plant will need light to grow. Compared to more mature plants, however, your seedling is much more sensitive to intense light. Because of that, you should be careful when starting out with strong LEDs.[1]

        If your LED has a dimming option, turn your light to a lower intensity. If this isn’t an option, consider moving your lights further up, away from the seedling. On the other hand, ensure that you do not move the lights too far up, as this could cause the seedling to grow spindly and lanky.

        Likewise, if your LED has a switch to activate either a vegging or flowering spectrum, set it to veg, where the light normally emits a “cooler” blueish light, which is optimal for this stage. Set your timer to 18 hours of light per day, with 6 hours of darkness.

        As your seedling grows taller, stronger, and approaches the most robust part of the vegetative growing stage, you can then gradually increase the light intensity. Besides, some studies indicate that you can use full light only if your plants are perfectly hydrated.

        2. LED Lights During Vegetation

        LEDs Veg Phase

        Set your light to 18 hours per day and 6 hours of darkness. Some growers choose to grow with 20–24 hours of light to maximise vegetative growth.

        Monitor your plant’s development; if all goes well, it should grow healthy, strong, and bushy. If it grows lanky and spindly instead, this is likely because your plant is not getting enough light. Increase the intensity by lowering the light toward the plant canopy or turning up the intensity using the dimmer if your light has one.

        How long you want to veg your plant will normally depend on how much space you have available. You can technically let your plant grow under 18–24 hours of light as long as you want, but there will likely come a time when you want to switch to flowering, as the plant would otherwise simply grow too big. Know that some cannabis strains can stretch considerably (up to 2x or more) during early flowering. Take this into account upon deciding when to initiate the switch to bloom.

        3. LED Lights For Flowering

        LEDs For Flowering

        Photoperiodic cannabis starts to flower in late summer when the daylight hours naturally begin to diminish. Indoors, the grower is responsible for inducing bloom by setting the light schedule to 12 hours of light and 12 hours total darkness. If your LED light has a flowering switch, turn it to flowering mode.

        When you flower indoors on a 12-12 schedule, it is important that the 12 hours of darkness are not interrupted. So make sure that your tent or greenhouse doesn’t have any light coming in from outside. This would otherwise revert your flowering plant back to veg or potentially cause other issues such as hermaphroditism.

        If your LED has a dimmer, now is the time to turn your light to its maximum intensity, or lower your light to the recommended distance from your plants for the flowering stage. If you are not sure what this distance is, most grow light producers have recommendations available.

        Important: if you change anything with your lights, such as when you increase intensity and/or lower their position, make sure to do so gradually over several days, rather than in one go. Too sudden of a change can stress your plants too much.

        Autoflowers and LED

        If you’re growing autoflowers rather than photoperiodic strains, you don’t need to bother with initiating flowering by switching your lights to 12 hours on/off. You can just leave your autoflowers at 18–24 hours of light per day up until harvest. Then again, if your LED light has a flowering switch, you should still use it once your autoflowering cannabis is in bloom. This will help increase yield.

        LED Compared to HID Grow Lights

        HID lights, such as MH/HPS grow lamps, are still widely used as they are cheaper than good LEDs, yet are still reliable for growing top-quality weed. Furthermore, grow tent kits often include HID lights, so many new growers start out with these, rather than LEDs. If you’re wondering now whether you should switch to LED, here are some more aspects to think about.

        What is Your Budget?

        Although you can get LED grow lights “for cheap” nowadays, many of these budget versions from overseas are not worth the money you’d save outright from avoiding high-quality fixtures. If you want quality LEDs, you will normally need to spend some good money to get a light that promises good yields and will last you a long time. So if you’re on a budget and don’t want to, or can’t, spend a lot, it makes sense to continue with HID for the time being, rather than settling for a cheap LED. HID lights will still do a splendid job supporting growth and flowering—in fact, they can still outshine a decent amount of LEDs when it comes to performance.

        Heat Produced by HID Lamps Can Be a Pro or Con

        As already mentioned, HID lamps produce a large amount of heat. So, if heat in your grow room is a concern, you definitely want to look into LEDs. This can save you additional money on exhaust and cooling systems. On the other hand, if you grow in a cold environment, you may just want to stick with your HIDs as they keep the grow room cosy for your plants without

        Light Bulb Statistics

        Which Light Grows Better (and More) Buds?

        Are there any differences in bud quality and yield with LEDs compared to MH HID lights? Some growers say that MH lamps give better yields or “prettier buds” compared to LEDs. But there are also those who say that, LED lights make for a better taste and/or overall better quality of weed. Obviously, what is really “better” is open to interpretation.In the end, everything comes down to a good fixture with enough PPFD. This is the final measurement that can help you maximise yields.

        For additional information on how LEDs compare to other types of grow lights, you can also read our article on the pros and cons of different types of lights for cannabis. 

        How to Avoid Problems When Growing With LED

        Modern LED grow lights, for example COB lights, can emit light that is as intense as that from HID. If your plants are too close to your LEDs, this can lead to “light burn”, with discoloured or bleached leaves, nutrient deficiencies, and all sorts of growing troubles. Because of this, it is important to keep your LEDs the proper distance away from your cannabis plants.

        There is no “one size fits all” recommendation for the right distance for all types of LEDs, since this varies greatly by type. It depends on the amount of light your LED is emitting, whether your lamp also uses lenses or reflectors, and so on. The manufacturer of your lights should clue you in to the recommended lamp distance from the canopy, either on the instructions that come with your lights or on their website. As a general rule, however, most LEDs should be about 30–45cm away from the tops of your plants to support healthy and vigorous growth.

        Happy growing!

        External Resources:
        1. Cannabis Grow Lighting Myths and FAQs with Dr. Bruce Bugbee - YouTube https://www.youtube.com
        Disclaimer:
        This content is for educational purposes only. The information provided is derived from research gathered from external sources.

        Are you aged 18 or over?

        The content on RoyalQueenSeeds.com is only suitable for adults and is reserved for those of legal age.

        Ensure you are aware of the laws of your country.

        By clicking ENTER, you confirm
        you are
        18 years or older